Products

AUGUSTA PALISADE SPEARPOINT / FISHTAIL PALE

SPEARPOINT WITH FISHTAIL

This pale has a spearpoint tip and a 2 point fishtail at the bottom of the pale.

Augusta Palisade is available in a heavier and slightly lighter specification which does make a difference to the price.

AUGUSTA 60 : is the heavier spec (40x40x2,0mm) and is 60mm wide.
AUGUSTA 50 : is the lighter spec (30x30x2,0mm) and is 50mm wide.
Both Augusta 50 & 60 are available in all pale tip variations.

CLICK ON PHOTOS TO ENLARGE

AUGUSTA SPLAYED POINT PALE

SPLAYED POINT

This pale has a 3 point pale tip and the bottom of the pale is square.

Augusta Palisade is available in a heavier and slightly lighter specification which does make a difference to the price.

AUGUSTA 60 : is the heavier spec (40x40x2,0mm) and is 60mm wide.
AUGUSTA 50 : is the lighter spec (30x30x2,0mm) and is 50mm wide.
Both Augusta 50 & 60 are available in all pale tip variations.

CLICK ON PHOTOS TO ENLARGE




AUGUSTA XT EXTREME 7 POINT PALE
"XT" EXTREME 7 POINT

This pale has a 3 point tip 4 extra points just below the pale point and the bottom of the pale is square.

Augusta Palisade is available in a heavier and slightly lighter specification which does make a difference to the price.

AUGUSTA 60 : is the heavier spec (40x40x2,0mm) and is 60mm wide.
AUGUSTA 50 : is the lighter spec (30x30x2,0mm) and is 50mm wide.
Both Augusta 50 & 60 are available in all pale tip variations.

CLICK ON PHOTOS TO ENLARGE


STANDARD CHANNEL BEARERS (WELDED SYSTEM)

AUGUSTA WELDED PALISADE SYSTEM
CHANNEL BEARERS

STANDARD LENGTHS : 3,0m & 2,5m.

SPECIAL LENGTHS  : cut to size or to order

PROFILE          : 25 x 60 x 25 x 2,0 mm

PALE SPACING     : 170mm centre to centre.
                   3,0m bearer holds 17 pales
       2,5m bearer holds 14 pales

GAP BETWEEN PALES : Augusta 60 = 110mm
                    Augusta 50 = 120mm      

Standard channel bearers can only be used as a welded system.
Standard channel is normally used for the manufacture of square (90 degree)
panels but can be welded at fairly extreme angles to accommodate sloped ground.      

CLICK ON PHOTOS TO ENLARGE

LIP CHANNEL BEARERS (BOLTED SYSTEM)

AUGUSTA BOLTED PALISADE SYSTEM
LIP CHANNEL BEARERS

STANDARD LENGTHS : 3,0m & 2,5m.

SPECIAL LENGTHS  : cut to size or to order

PROFILE          : 10 x 45 x 55 x 10 x 2,0 mm

PALE SPACING     : 170mm centre to centre.
                          3,0m bearer holds 17 pales
                          2,5m bearer holds 14 pales

GAP BETWEEN PALES : Augusta 60 = 110mm
                               Augusta 50 = 120mm      

Lip channel bearers are recommended for sloped or undulating ground. Lip Channel can only be used as a BOLTED system.

Bolted panels neatly follow the contour of the slope or undulations and can accommodate extreme ground slopes.      

CLICK ON PHOTOS TO ENLARGE

Copyright Cape Palisade Fencing | All rights reserved 2010
Business Solutions From Internet Technology